Eleaf iStick Pico 25

Eleaf iStick Pico 25

Eleaf iStick Pico 25

Akkuträger - Eleaf iStick Pico 25

Lieferbarkeit: In Stock

CHF 44,90

In den Korb

Produktinfos

The iStick Pico 25 ingeniously packs a big 0.91-inch screen that offers a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and can handle various tanks up to 25mm diameter.

Parameter:

Size: 25.0mm*48.0mm*104.0mm
Weight 143.2g
E-liquid capacity 2ml
Output wattage 1-85W
Maximum charging current 2A
Maximum output current 50A
Thread type 510 thread
Battery type high-rate 18650 battery
(Continuous discharge current should be above 25A)
Output mode VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW mode)

Big 0.91-Inch Screen with Optional Interfaces
The iStick Pico 25 features a big 0.91-inch screen that offers concise and clear interfaces. And there are three switchable interfaces for you to choose the one you’re most accustomed to.

High Compatibility
The iStick Pico 25 can handle various
tanks up to 25mm diameter
2A Quick Charge Capability
With a maximum charging current of 2A, the battery in the iStick Pico 25 can be fully charged much more quickly.

Replaceable 18650 Battery
The iStick Pico 25 is powered by a single 18650 battery, allowing to always carry spare batteries with you.

Upgradeable Firmware with Preheat Function
Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. And the firmware is upgradeable to be always the latest.

Dual Circuit Protection
The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging.

Functions of Micro USB Port
Charging: the 18650 battery can be charged in the iStick Pico 25 through the side USB port via wall adapter or computer or charged with an external battery charger.

Firmware upgrading: the firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.

Download the file below to put custom logo into your iStick Pico 25 (the files are being hosted by eleafworld.com, if they aren´t accessible anymore, please visit: eleafworld.com